Kingston ValueRAM 4GB DDR3 SDRAM Memory Module

Upgrade the memory in your compatible system using the 4GB ValueRAM DDR3L 1600 MHz SO-DIMM Memory Module from Kingston. This single memory module features a capacity of 4GB, a clock speed of 1600 MHz (PC3L-12800), a 204-pin SO-DIMM form factor, operates using either 1.35 or 1.5V, and has latency timings of 11-11-11. Adding more memory to your system will help boost its capabilities, including improving system performance and application responsiveness. Start-up times will be improved with fewer delays during routine operations, and more programs will be able to run simultaneously with easier switching between them. This memory module is protected by a limited lifetime warranty. JEDEC standard 1.35V (1.28 ~ 1.45V) and 1.5V (1.425 ~ 1.575V) power supply VDDQ = 1.35V (1.28 ~ 1.45V) and 1.5V (1.425 ~ 1.575V) 800 MHz fCK for 1600 Mb/s per pin 8 independent internal banks Programmable CAS latency of 11, 10, 9, 8, 7, and 6 Programmable additive latency of 0, CL - 2, or CL - 1 clock 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address "000" only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional differential data strobe Internal self-calibration through ZQ pin (RZQ: 240 Ohms ± 1%) On-Die termination using ODT pin Average Refresh Period: 7.8 μs at lower than TCASE 185°F (85°C) 3.9 μs at 185°F < TCASE ≤ 203°F (85°C < TCASE ≤ 95°C) Asynchronous reset PCB: Height 1.18" / 29.97 mm, double-sided component